Priming the pump of Potterton Bolier

[guestjim]

I bled the radiators in a couple of rooms and the result was that the system pressure of the Potterton Performa 28 is zero. So the pump is not working and no central heating.

There are a couple of taps on the piping below - and I think that some combination of them will allow the pump to be primed. Grateful for any advice as to how to prime the pump.

Jim

 

[swbjackson]

You need to find a filling loop to top up the water in the system.

Have a look at http://www.diynot.com/wiki/plumbing:filling_loop

Mike

 

[guestjim]

Great advice

Jim