Prisma bolier 24se pilot light keeps going out

Joined
17 Feb 2008
Messages
1
Reaction score
0
Location
Coventry
Country
United Kingdom
Hi
Our pliot light keeps cutting out and we have to reset the system by pushing the red button. This is happening quite a lot not any ideas.
Thanks
 
check system pressure, should be about 1bar cold.
 
The red light indicates an ignition failure ( nothing to do with system pressure though ).

There can be several causes but tey all need a competent CORGI to deal with them so I cannot advise you on the details.

Most likely cause can be fixed and does not require any spare parts but others will involve parts costing about £98 !

Have you been to the newish combined indian/chinese eat as much as you like restaurant in the Old Fire Station at Meadow Pool. Its a bit like a works canteen but the food is good! The best indian food is the fancy new place at the top of Far Gosford Street but its expensive and the portions are very small!

Tony Glazier
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top