problem in installing electric shower

[mark2809]

ive installed the a triton t90i shower and eveything is working on it apart from there is no water coming through it......it was originaly installed in ensuite and i changed it to main bathroom via pulling pipes back up through attic and back down into the hot press .same with electric ,light is on on shower and the pump is working its just that no water is coming through ,any help would be appreciated.........
thank you
mark

 

[delmel]

silly but have you opened up the valve in the loft to supply the water feed to the shower. If so aounds like a solenoid fault, but strange if it worked prior to you moving it.

 

[ArtfulBodger]

You must open the bleed screw to purge the air and prime the pump. Full instructions here ....

http://www.tritonshowers.co.uk/installation/pdf_2/1-existing/T90si_UK_Guide.pdf

 

[mark2809]

You must open the bleed screw to purge the air and prime the pump. Full instructions here ....

http://www.tritonshowers.co.uk/installation/pdf_2/1-existing/T90si_UK_Guide.pdf[/QUOTE] thanks very much for your reply it helped so much