Problem with Honeywell ST6400

Joined
1 Mar 2007
Messages
8
Reaction score
0
Location
Plymouth
Country
United Kingdom
Hi All,

I have a Honeywell st6400c controller running into an Amptec Electric boiler. Nothing overly complicated - standard Y Plan heating and hot water (via a thermal store). However - since changing the hotwater/heating programmes since the clocks changed - it now no longer 'calls' the boiler. It will only work when set to 'constant'. I have triple checked the timings/programme (the HW 'on' light on the ST6400 does come on - but no call light on the boiler).

Can anyone please shed some light on why this maybe occurring?

Cheers in advance.
 
Sponsored Links
Have you got an off before the on.

Is it set for 24 hr or 12hr.

Check the programs for AM and PM, quite a common problem.
 
Hi doitall - thanks for the reply. The prog settings are (all 7 days) - pretty sure it's 24hr setup:

on: 05.30
off: 07:00

on: 13:00
off: 14:30

on: 22:00
off: 23:30

I'm away for a few days and will fiddle around when i get back.

Cheers.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top