- Joined
- 24 May 2018
- Messages
- 5
- Reaction score
- 0
- Country
Getting an E130/131 fault code. The flue thermistor has been changed with no difference. The odd thing is that when hot water is demanded, it heats to 60 degrees and then the E130 happens. When CH is demanded it heats to 80 degrees and is OK with no fault. If I demand HW with CH on, the temperature drops to 60 as expected, the CH demand light goes out and HW is produced but at a lower temperature than usual (The 60 seems to be inaccurate, but not the 80 on the CH). Anybody got any ideas?