Pyronix Deltabell Sounding when go into master engineer code

Joined
7 Feb 2023
Messages
16
Reaction score
0
Country
United Kingdom
Hi

I have set up my new alarm system Pyronix Euro 46 Version 10 on the bench before install and on fitting a Deltabell X with Lightbox
setup as Photos attached it rings the bell sounder on entering Programing eg 1111, I have also programmed the hold off to 0059 and connected to
NO and linked 0v to C.

Any Help would be great
 

Attachments

  • IMG_20230209_155528.jpg
    IMG_20230209_155528.jpg
    262 KB · Views: 52
  • IMG_20230209_155618.jpg
    IMG_20230209_155618.jpg
    231.7 KB · Views: 46
  • IMG_20230209_172022.jpg
    IMG_20230209_172022.jpg
    226.7 KB · Views: 42
Last edited:
Sponsored Links
Remove the bell trip ( blue wire ) at the bellbox …..does it still do it ?
 
No it does not I not sure what else i have done but got SAB tamper now also
 
Sponsored Links
Change outputs
Endstation outputs
Bell O/P 0059 Engineer Access

Shoul I be Able to meter open and closed on the N/O contact after the 1111 Code is input
 
You have changed the bell output ….that why it’s ringing …you need to set the relay to engineer access and change the bell output back …
 
Sorted Very Helpfull Thanks

Now i can move on to my last item Twin Alert Hope I can do better on that
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top