1. Visiting from the US? Why not try DIYnot.US instead? Click here to continue to DIYnot.US.
    Dismiss Notice

Pyronix enforcer 10 or euro46? comms question

Discussion in 'Alarms, CCTV & Telephones' started by sk8nride, 14 Jan 2020 at 2:56 PM.

  1. sk8nride

    sk8nride

    Joined:
    Tuesday
    Messages:
    1
    Thanks Received:
    0
    Country:
    United Kingdom
    Hi, First post.

    Can the enforcer use more than 1 comms on alarm? I want to use the app, via wireless, but also pstn and gsm.. does it have space for the modules? Can it use more than 1?

    Same with the euro46?..

    Also is there 1 module or 2 to make the euro46 WIRELESS for the sensors and WIRELESS for the comms side?

    For a home environment I wanted the KIT3 enforcer with 4xpirs,1xcontact,wireless app/sensors setup but like the idea of the euro46 for some future wired options, eg more sirens, bell boxes etc.

    Last question I was a always lit bell box, but cant run a wire, does the wireless have that option with a seperate battery, or the original battery just lasts less? Or without a psu from a panel am i out of luck and have to goto flashing LED's?

    Any advise pls.

    Thanks

    Paul
     
  2. Sponsored Links
  3. sparkymarka

    sparkymarka

    Joined:
    16 Feb 2011
    Messages:
    7,233
    Thanks Received:
    1,111
    Location:
    Sheffield
    Country:
    United Kingdom
    1 coms module only , you can get a gprs plus sim module , this gives notifications and app control , you can hardwire a backlit bellbox , you can power the wireless bell locally AND fit a light box which needs to be modified
     
Sponsored Links
Loading...

Share This Page