Pyronix Enforcer - Bell rings as soon as I Set

[Nepomucene]

Hi,

I have installed a Pyronix Enforcer, all inputs seem correct and assigned to the right zone, the issue I have is more on the Wireless Bells side of things.
The second I set the system, the Bells scream.
The issue is that the system's logs do not see an "Intrusion" For the Panel, all looks good.
I have even changed the Volume settings to 1 and then 2, but still the bells blare when I set.
I tend to think of an issue with the way I have paired/set them, but any advice would be more than welcome!!

Thanks,

PS: I have tried triggering a sensor while the bell was blaring, and then got a proper Burglary alert in the Logs and by Notification

 

[Nepomucene]

Looks like someone stupid put the wireless bell's output type to 22 (alarm full set).
I put it back to 14 and will test next time wife gets out of the house.

On the other hand, I'm the only one with the engineer code

 

[steveo44]

Engineers Test > Output Test > Output 0014.

Carnt hide behind the wife then.

 

[Nepomucene]

Tested and working now
I'll try to not be stupid next time