Pyronix enforcer - how to increase wired inputs?

[Reu]

Hi to all,

Is it possible to increase the wired inputs of the pyronix enforcer?
If yes, how?

Thanks

 

[secureiam]

Add remote input expander https://www.pyronix.co.uk/products-and-solutions/pcx-rix8plus

 

[sparkymarka]

Your going to need a power supply , if your connecting powered devices , eg pirs

 

[Reu]

Add remote input expander https://www.pyronix.co.uk/products-and-solutions/pcx-rix8plus

Thank you for your reply.
Very helpful

 

[Reu]

Your going to need a power supply , if your connecting powered devices , eg pirs

Thank you for your advice.
So, I have to plan where to place a power supply. Any power supply within the specs of the zem8plus will work? or a specific power supply is needed?

Thanks

 

[sparkymarka]

12v DC you can buy the expander with a psu built in as it will also require battery back up
Euro zem8 psu

 

[Reu]

12v DC you can buy the expander with a psu built in as it will also require battery back up
Euro zem8 psu

Thanks again for your reply.

So if I buy zem8 psu, I still require a battery back up?

 

[sparkymarka]

You will need to fit a battery in the psu

 

[Reu]

You will need to fit a battery in the psu

Ok, thanks for your help