PYRONIX sterling 10 alarm

[gasypete]

Can someone tell me, what battery will fit a stirling 10 alarm system.Thanks for any help given.

 

[Handymanjo]

7.0ah will fit

 

[gasypete]

Thanks for that, are they all the same size, terminal positions, 12v ect.
I want to buy the battery before i take the cover off, so i can replace it in 1 go.

 

[Handymanjo]

Your control panel will take up to a 7.0ah battery
If could have 2.8 ah in side
All the terminals are the Same size on the batteries
I would purchase a 7.0 ah battery
Greater standby time in power fail.

 

[sparkymarka]

Unless it's a sterling 10 compact ! 2.1ah ....

 

[gasypete]

Thanks for your help, I will order one now.

 

[gasypete]

Its label is Stirling 10, no compact label.

 

[sparkymarka]

Is the keypad on the panel or separate ?

 

[gasypete]

Separate.
Also, if i kill the power, and battery, will i have to reprogram all the settings.
I plan on changing a couple of PIRs aswell.

 

[Handymanjo]

No
Your control panel has a nvm.

 

[gasypete]

Thanks for your help I really appreciate it.

 

[Europlex]

Separate.
Also, if i kill the power, and battery, will i have to reprogram all the settings.
I plan on changing a couple of PIRs aswell.

Why do you want to power down the panel?

You only have to touch the battery, NOTHING ELSE.

To change the battery open panel remove old battery then connect the new one, Red to Red - Black to Black

Close panel

That's the basics.

On opening the panel you will have to enter your code (or the Eng. code) to stop the noise

 

[gasypete]

Is it not safer if I am to change PIR.?

 

[Europlex]

Depends how careful you are. I would just go to the panel and remove one leg of the 12v supply to the PIR.

I wouldn't really, I would do it still powered up, but I've must have done 100s of detectors over the years.