I’m moving into my first home next week and will preface by saying I am very new to the DIY scene. Whilst looking for furniture I have struggled to find a decent dining table within my price range and have instead decided to use some quartz offcuts leftover from the kitchen to build my table.
The size of the quartz is 72x36 inches (20mm) and weighs around 83.5kg/184lbs. I’ve sourced the four industrial Y shaped legs in the image and my plan is to attach MDF sheets to the bottom of the quartz (using epoxy or glue) and then to drill the legs into the MDF.
I understand this would end up being a fairly heavy table and essentially my question is whether I should add any further support to the underside in order to prevent racking etc. or whether my initial plan should create a stable table?
Thanks
The size of the quartz is 72x36 inches (20mm) and weighs around 83.5kg/184lbs. I’ve sourced the four industrial Y shaped legs in the image and my plan is to attach MDF sheets to the bottom of the quartz (using epoxy or glue) and then to drill the legs into the MDF.
I understand this would end up being a fairly heavy table and essentially my question is whether I should add any further support to the underside in order to prevent racking etc. or whether my initial plan should create a stable table?
Thanks
