- Joined
- 2 Mar 2019
- Messages
- 298
- Reaction score
- 3
- Country
Right. What about the coloured render. Is 10mm ok or same apply? He said thin coat is better as thick tends to crack
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
Question on render
- Thread starter xdrive
- Start date
Right. What about the coloured render. Is 10mm ok or same apply? He said thin coat is better as thick tends to crack
unless i misunderstand your posts, from your pics you dont need a stop-bead you need a Bell Cast fixed at the base of any render.
the Bell Cast is set above any DPC in the wall or a min of 150mm above ground level.
when you say the render is off do you mean all the render is hacked off back to exposed brickwork?
why not post pics showing the whole of that wall?
the down pipe or gate post or whatever it is should be temporarily removed to enable a clean job.
whats happening when you reach the outside corners of the building?
or what do you intend at any window openings etc?
the Bell Cast is set above any DPC in the wall or a min of 150mm above ground level.
when you say the render is off do you mean all the render is hacked off back to exposed brickwork?
why not post pics showing the whole of that wall?
the down pipe or gate post or whatever it is should be temporarily removed to enable a clean job.
whats happening when you reach the outside corners of the building?
or what do you intend at any window openings etc?
Last edited:
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
