Quick set 'something' for private road pothole

Take a look at Vicat Prompt natural cement for your concrete mix.
It sets very fast so is oftem mixed with Tempo to slow it down.
 
You could use the car to compact it, I got a bit of tin placed it over the cold tarmac so tyres do not push it out, and ran over the tin to compact it. But a job for a hot day, or the cold tarmac is a pig to work with.
Do you mean a tin sheet that you placed over the tarmac?
 
What's the road made of: concrete or blacktop. Always better with like for like if possible.

You do need to prepare the potholes whatever you do: cut the edges down so you don't have a feather edge. The better the job you do, the longer it'll last. Are all of the users doing the work or just you? Should at least be possible to agree a way to get more time: do one side first for instance, agree window when no one will access.

I have successfully used Postcrete (a material I normally view as the devil's work!) as normal concrete ie mixed with water on a board to produce very fast setting concrete for remedial works under a floor. Be warned though you have to work like crazy as it sets lite rakly as you watch.
 
What's the road made of: concrete or blacktop. Always better with like for like if possible.

You do need to prepare the potholes whatever you do: cut the edges down so you don't have a feather edge. The better the job you do, the longer it'll last. Are all of the users doing the work or just you? Should at least be possible to agree a way to get more time: do one side first for instance, agree window when no one will access.

I have successfully used Postcrete (a material I normally view as the devil's work!) as normal concrete ie mixed with water on a board to produce very fast setting concrete for remedial works under a floor. Be warned though you have to work like crazy as it sets lite rakly as you watch.
This private road is not tarmaced and not cemented just a stony (natural stone bits) plus soil road with the end (joining the main road) tarmaced.
 
You will be liable for any damage even on a private road.

Having lived on an unadopted street, which is technically similar to but not the same as a private road, I would go with mixing ballast and cement. You’d be consolidating the surface not filling the hole with fresh material.

Our road was a mass of potholes, blocking one hole changed the water flow and flooded other areas.
Only when the residents all got together did it get resolved. They bought several truckloads of stone to resurface the whole rd.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top