Rad going cold after two hours

Joined
4 Jan 2021
Messages
5
Reaction score
0
Country
United Kingdom
Evening, my radiator at the end of my chain of radiators heats up for two hours before going cold. Thermostat have been changed within the house recently and all set to five.
The pipe leading to the rad is no longer warm after two hours and rest assured the room is not at temperature.
The guy who fitted them has been out twice and still not resolved the issue. Any help would be gratefully accepted, many thanks
 
Sponsored Links
Could it be the cool rad is feed of another and when that rads shuts its cutting the supply to the rad you are concerned about.
 
All the other rads stay red hot so I’m unsure if that would be the problem or not?
 
After going cold ,does it then start to heat up again ,or remain cold ?
Try removing the TRV actuator head ,see if it makes a difference.
 
Sponsored Links
I’ll give it a go thank you. It stays cold until I turn the heating off all together and back on shortly after
 
Did this radiator ever work properly ,before TRV's were fitted ?
 
It would stay on yes but never really get to temperature
 
System needs balancing ,and if the rad heats after removing the TRV actuator ,the TRV is duff.
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top