- Joined
- 2 Apr 2005
- Messages
- 109
- Reaction score
- 1
- Country
Ok, I messed up....
I did the pipe work for a 1000mm x 600mm radiator a few months ago, but when I measured it up by putting on the valves etc I neglected to put the extended bit on the TRV which comes out of the side, this has made me around 60mm short on the pipe work which is now fixed in cement etc
Does anyone know what a simple way out of this is, I was thinking of bending pipe as have around 160mm coming out before cutting down and taking it out and back up?
I didn't know if there was something you can buy as surely people sometimes change a rad for a bigger wider one?
Thanks
I did the pipe work for a 1000mm x 600mm radiator a few months ago, but when I measured it up by putting on the valves etc I neglected to put the extended bit on the TRV which comes out of the side, this has made me around 60mm short on the pipe work which is now fixed in cement etc
Does anyone know what a simple way out of this is, I was thinking of bending pipe as have around 160mm coming out before cutting down and taking it out and back up?
I didn't know if there was something you can buy as surely people sometimes change a rad for a bigger wider one?
Thanks