Rangemaster Leisure 110 oven problem

Joined
27 Oct 2010
Messages
1
Reaction score
0
Location
Aberdeenshire
Country
United Kingdom
Hi all , and thankyou for looking, and hopefully helping me out.

One of my ovens comes on initially at low heat then jumps to full heat regardless of the knob position ( other than the off ) There is no adjustment on the control knob between 1 to 9, it stays at full heat.

Could anyone help in telling me what the problem could be. I am thinking towards the gas control valve workings......

Thankyou
 
Sponsored Links
The way it starts is normal ie small flame to start with and once the flame supervision device heats up it then goes to high flame.As the oven is cold it will stay on high until the oven has reached the desired cooking temp which is selected by the oven control numbers 1--9.Try operating the oven for 10/15 mins on 2 and see if the flame reduces in height.If it fails to reduce then I would suspect the thermostat has failed and repair is not possible,only a new control and this shoud only be done by a Gas Safe registered engineer who has cooker qualifications
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top