- Joined
- 5 Jan 2020
- Messages
- 2
- Reaction score
- 0
- Country
Evening All
Our Boiler stopped working for hot water unless the heating is on. Having a good knowledge of the workings, I've spotted the Diaphragm isn't moving enough to press the micro switch, also when the hot water is flowing it isn't as hot as normal and the CH seems to also flow so guessing the 3way diverter isn't moving fully.
I've ordered and fitted a new Diaphragm but noted that 1) the centre bar on the new one was shorter than the one fitted, and when fitted wasn't out enough so have swapped to the original bar. But 2) that there is still the limited amount of movement as before.
As the opposite end simply sits inside the diverter body there's nothing to impede is movement?
Any ideas?
Thankyou in advance.
KR
David
Our Boiler stopped working for hot water unless the heating is on. Having a good knowledge of the workings, I've spotted the Diaphragm isn't moving enough to press the micro switch, also when the hot water is flowing it isn't as hot as normal and the CH seems to also flow so guessing the 3way diverter isn't moving fully.
I've ordered and fitted a new Diaphragm but noted that 1) the centre bar on the new one was shorter than the one fitted, and when fitted wasn't out enough so have swapped to the original bar. But 2) that there is still the limited amount of movement as before.
As the opposite end simply sits inside the diverter body there's nothing to impede is movement?
Any ideas?
Thankyou in advance.
KR
David