I am wanting to re-route the cold water mains supply to my combination boiler. I understand how to recharge the CH system should I have to, however what I am wanting help with is... if I cut off the supply to the boiler and cut the pipe to re-route the piping how will this affect the feed to the boiler which generates the hot water to my taps. Can I do the work and just reconnect the supply... will the combi boiler work as previous to the work.
-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
Re-routing cold water supply to Combi Boiler
- Thread starter JohnH1959
- Start date
You can cut the cold supply to the boiler without a problem.
Just do it the boiler won't care.
It only heats the water when cold mains is passing through it and
the central heating side is sealed from the cold main anyway.
Just do it the boiler won't care.
It only heats the water when cold mains is passing through it and
the central heating side is sealed from the cold main anyway.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
