Removing raised shower tray

Joined
18 Mar 2026
Messages
6
Reaction score
0
Country
United Kingdom
How do I remove this shower tray.

IMG_6912.jpeg
 
Have you removed all the wall, tiles, it should just lift out? The feet may just be stuck/catching on something on the floor.
 
You don't think is bolted to stuck to the floor?. I'll knock out the tiles close to the legs.

Thanks!
 
Looks like that standard foot has been covered in tile adhesive? Hammer and chisels and break it out?
 
I found what's holding it in there were screws that are screwed into the wood in the floor.

How do you get a screwdriver in there and get any leverage in there,especially the ones at the back? How are they screwed in the first place?
 

Attachments

  • IMG_6913.jpeg
    IMG_6913.jpeg
    891.1 KB · Views: 13
They would normally be screwed in at an angle, so get a small screwdriver or the sharp end of a screw and clear out the slots in the heads of the screws, see what type of screw they are - phillips 2 or pozi 2 - and then use a battery gun with the correct bit to get them out.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top