i have removed a tile hung section under a window external and screwed external plywood to studwork.i would like to render the bay.what would be my best way thanks.
rendering on plywood
- Thread starter johnnyginge
- Start date
Sponsored Links
we have rendered a loads of these .you need to fix some EML onto the ply covering it all making sure the EML is tight and joints tied with wire
then you mix a 3 to 1 sand and cement with waterproofer and plasticiser
and apply a scratch coat let this harden for two days then dampen down and apply your finish coat
then you mix a 3 to 1 sand and cement with waterproofer and plasticiser
and apply a scratch coat let this harden for two days then dampen down and apply your finish coat
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
