While moving a very heavy frameless glass door, the corner got crunched on a tiled floor.
So instead of arrised corner, it’s rounded off …
The glass will close on top & side seals, so most of it is covered … but I should like to repair if only to keep seal as it should be.
Anybody aware of any acrylic or resin that could be used, that will polish to clear, and remain clear.
Assume such stuff is used windscreen repairs.
So instead of arrised corner, it’s rounded off …
The glass will close on top & side seals, so most of it is covered … but I should like to repair if only to keep seal as it should be.
Anybody aware of any acrylic or resin that could be used, that will polish to clear, and remain clear.
Assume such stuff is used windscreen repairs.