Something like this?
https://www.screwfix.com/p/honeywel...rc=aw.ds#product_additional_details_container
https://www.screwfix.com/p/honeywel...rc=aw.ds#product_additional_details_container
Replace a thermostat
- Thread starter Jupiter01
- Start date
Yes that would do. 
A corresponds with the existing thermostat 1 (L)
B corresponds with the existing thermostat 2 (ON)
C corresponds with the existing thermostat 3 (OFF)
The DT90 doesn't require an earth connection, so the earth wire should be insulated/isolated and tucked safely out of the way.
A corresponds with the existing thermostat 1 (L)
B corresponds with the existing thermostat 2 (ON)
C corresponds with the existing thermostat 3 (OFF)
The DT90 doesn't require an earth connection, so the earth wire should be insulated/isolated and tucked safely out of the way.
To the untrained eye this looks like off on my current diagram and hence, wire 3. Can I double-check this please.
Thanks again
Terminal 2 is ON
If you are looking at the switch position as drawn in the two diagrams, one is shown in the 'on' position and one is shown 'off' position (or almost 'off'
)
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
