- Joined
- 6 Jul 2004
- Messages
- 37
- Reaction score
- 0
- Country
The problem is that hot water circulates in both water and CH regarding of the controller setting. I removed the electrical part of the V4073A and whatever the position I manually set the shaft to it still circulates in both circuits. Previously on another system I was able to change the head only. So it looks like this time I have got to drain down and replace the valve.
My concern is that if the olives are stuck on the pipes I don't have enough length of pipe to shorten the pipe and fit a new olives.
Can I use the existing olives or will they leak?
My concern is that if the olives are stuck on the pipes I don't have enough length of pipe to shorten the pipe and fit a new olives.
Can I use the existing olives or will they leak?