Replacing an old mira shower with bottom right water/elec

Joined
30 Sep 2013
Messages
281
Reaction score
6
Location
Lanarkshire
Country
United Kingdom
Hi just a quick question. A friend has asked me to replace a very old mira shower in a house he's just bought. The water and cable entries are on the bottom right whereas most miras seem to have entry on the left (except the "jump"). I was hoping to get an exact match to save any hassle but the water inlet seems a bit unusual, a quite big rotating valve that is facing rearwards (although iv read these should only be used up or down ). Does anybody know of any mira or otherwise showers that have this same setup?

Iv uploaded a picture of the old shower (I don't have the model number)

http://www.diynot.com/network/Mmcgar/albums/

Thanks
 
Sponsored Links
Joined
4 Mar 2013
Messages
2,883
Reaction score
712
Country
United Kingdom
Email that pic to the very helpful people at showerdoc.com. They are quick to respond and will advise you on which shower is a direct replacement for that model. And if there is no direct replacement they will advise on the best alternative for easy fitting.
 
Joined
30 Sep 2013
Messages
281
Reaction score
6
Location
Lanarkshire
Country
United Kingdom
Thanks for the replies. The mira advance seems to be exactly wot I'm looking for... Except it's around 300 quid, I think my mate is looking to spend about half that. I might just go a cheap triton with multiple fittings, I'm a spark to trade but hopefully there won't b too much additional plumbing involved........ :confused:
 
Joined
4 Mar 2013
Messages
2,883
Reaction score
712
Country
United Kingdom
Also have a look at the bristans. Not the best quality but cheap and have 5 different electrical and water connection options.
 
Sponsored Links
Top