I grouted my Indian stone paths and patios several years ago with Easyjoint to a depth of 25 mil as instructed, result was very good.
After several jet washes the grouting has worn leaving a depth of approximately 10-15 mil. , 25 mil in some small areas.
To rake out again to a depth of 25mil is a huge job, I know , I did it once!
Is there anything on the market now which is used like Easyjoint , ie. brushed in wet, but will work with a lesser depth?
It's a large area so I'm reluctant to hand point with mortar.
Thanks
After several jet washes the grouting has worn leaving a depth of approximately 10-15 mil. , 25 mil in some small areas.
To rake out again to a depth of 25mil is a huge job, I know , I did it once!
Is there anything on the market now which is used like Easyjoint , ie. brushed in wet, but will work with a lesser depth?
It's a large area so I'm reluctant to hand point with mortar.
Thanks
