Replacing old Satchwell TL25T Room Thermostat

Joined
24 Oct 2010
Messages
1
Reaction score
0
Country
United Kingdom
Hope someone can steer me in the right direction.
I'm trying to replace the Satchwell TL25T (that's what I think it is anyhow - see http://www.facebook.com/photo.php?pid=31670958&l=817c12215f&id=1025452494 ) thermostat in my mother in law's house with a Sunvic TLX4101.
After blowing a fuse at my first attempt to connect it up, I've decided to put it all back together and retire to seek help.
I have 3 wires plus an earth going to the TL25T, connected as follows:
Terminal 1 Black Wire (seems to have approx 30v AC)
Terminal 2 empty
Terminal 3 Red Wire (has approx 2-3v)
Terminal 4 Yellow (earth core in twin & earth) - 30v AC
.
The Sunvic has 3 terminals:
Terminal 1 - Demand
Terminal 2 - Common
Terminal 3 - Satisfied

My question is, what wire should go where? and have I got the right sort of replacement in the first place?
 
Sponsored Links

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top