Replacing Sunvic TLX2259 with Salus EP101 Heating Controller

[Moogerz]

Hi,

I am replacing an old Sunvic TLX 2259 with a new Salus EP101.

Can anybody help with the wiring - I have tried replacing like for like but am getting no joy.

The old wiring is as follows:

1: Yellow
3: Red
4: Blue
[GALLERY=media, 71534][/GALLERY]

[GALLERY=media, 71535][/GALLERY]

Thank you in advance

 

[EFLImpudence]

L - Red
N - Blue
3 - Yellow
Plus earth

Retain the link.

 

[Moogerz]

Hi -

I tried that combination but it still didn't work...

 

[EFLImpudence]

Then you will have to do some testing to determine where the fault is.

Have you blown a fuse while trying combinations?
Many an hour wasted because of faulty 'new' parts.

 

[Whitespirit66]

There's a very good reason why it doesn't work. You're trying to replace a room stat with a single channel heating controller.

Or am I missing something?

 

[EFLImpudence]

It's just a switch but obviously any existing heating controller will have to be set to (permanently) on.