tried to replace a light switch last night, the one I bought from b&Q was different to what I removed
after trying various combinations i can't get my lights to work in sync
set up as follows;
lounge has a single switch by the door for the one ceiling light in the room
at the other end of the lounge is a 2 way switch, it controls the lounge light and also the kitchen light
(when i removed the existing switch it had a couple of black neutral cables together in a connecter and another short piece of wire bridging the switches), in an attempt to get the lights working i've removed this and now have 8 wires (not including earth) and 6 holes on the switch
what should go where?
tia
after trying various combinations i can't get my lights to work in sync
set up as follows;
lounge has a single switch by the door for the one ceiling light in the room
at the other end of the lounge is a 2 way switch, it controls the lounge light and also the kitchen light
(when i removed the existing switch it had a couple of black neutral cables together in a connecter and another short piece of wire bridging the switches), in an attempt to get the lights working i've removed this and now have 8 wires (not including earth) and 6 holes on the switch
what should go where?
tia