Rimlock sizes to fit glazed door

[spada01]

I'm going to get a glazed door like this:
http://www.screwfix.com/search.do;j...ton.x=0&searchbutton.y=0&searchbutton=submit#

Will a rimlock with 60mm backset fit a glazed door or do I have to stick to a 40mm?

 

[DAZB]

If you consider an average external door of 44mm thickness will have a stile width of 90mm plus then a 60mm rim lock will be ok. Just make sure it's a snug fit with the hole you drill.

 

[IJWS15]

Are you sure you mean a rimlock?

Only seen these on older houses.

Normally you would fit a mortice lock and make sure it meets your house insurance requirements (Normally 5 lever).

The length is normally determined by the type of handle you chose to use (Lever/knob).

You would get a better response in the Wood/carpentry section

 

[DAZB]

Sorry, for some reason i thought you meant one of these :

http://www.priceinspector.co.uk/d/3...-2-Bolts-1-Key-Pack-60mm-Brass-compare-prices

not sure why I thought that but never mind.