roof fall on a garden room

Can I also get some more views on whether the 5x2's will suffice for my roof or whether the 6x2s are an absolute necessity in my situation please. The rafters will be spanning 3 metres of the roof and have some overhang and I was going to centre them at 400. It will have a rubber roof on top of this.
See my post 2. It's a fancy shed at the end of the day and it's never going to get the snow load allowed by TRADA tables.

If you're really, really worried close 'em up to 300 crs. This will provide the same strength as notional 67mm wide timbers at 400 crs. TRADA lists 63s as ok to 3.1 clear span.

You don't need 150s, that's for sure
 
Thanks guys. I am happy to 300 centre the 5x2s but crucially I need to decide now whether it will be 5 or 6 inch rafters as I am building the walls accordingly, and staying within my 2.5m height limit.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top