Roomstat help ?

[danplumb]

I am a 20 y/o newly qualified plumber.. i do alot of work on plumbing/pipework.. but not too much on boilers and controls i have the basic knowledge, i have a 30 cxi glowworm boiler ( old style ) and i just bought a glowworm clima stat, seemed really straight forward to install, take the small loop wire out the system controls part on the boiler then 2 wires into the roomstat, power on the boiler, the climastat powers up and shows the current room temp, but when i turn the stat up. it shows on the screen upto 30, but the boiler will not kick in, have i done something wrong.. or is the climastat not suitable for my boiler ?
Appriciate any help.

 

[Kev F]

Has it paired, you'll have to go through the manuel

 

[danplumb]

Thanks for your reply,
Ive done everything i can see in the manual, its not a very explanitary one though in my eyes,
heres a copy of the manual, What would you suggest ?
http://www.glow-worm.co.uk/stepone/...lation-instructions-for-use-and-servicing.pdf

 

[D_Hailsham]

The Climastat needs an Ebus connection on the boiler; the CXi boiler does not have one. Change it for a Honeywell DT90E or, if you want a programmable stat, a CM901 or CM907.

Eaton: The Climastat is wired!

 

[danplumb]

Thanks for your reply d_hailsam. Which wireless room stat would you recommend for my old style 30cxi boiler ?

 

[danplumb]

Or can anybody else answer me this ? which wireless roomstat would suit my 30 cxi (old style ) glowworm combi ?
Thanks

 

[D_Hailsham]

Or can anybody else answer me this ? which wireless roomstat would suit my 30 cxi (old style ) glowworm combi ?
Thanks

Sorry I didn't reply earlier.

The Honeywell DT92E would be suitable or, if you want a programmable stat, the CM921 (24 hour) or CM927 (7 day).