rover 75 v.6 exhaust

Joined
22 Nov 2008
Messages
5
Reaction score
0
Location
Dorset
Country
United Kingdom
hi have a rover v.6 2 litre.. my problem is that the exhaust flange is blowing where it connects to the manifold.. i think that there should be a gasket on this flange but the main dealer says no. i've tried everthing to stop it blowing apart from putting a gasket on please help
 
Sponsored Links
If the mating surfaces are pitted then it probably would blow, I would be inclined to use a soft annealed copper gasket, smeared both sides with exhaust jointing paste.

Wotan
 
Sponsored Links
Back
Top