Rust converter

[norseman]

Thanks for the advice, but T-cut won't cut it (no pun)
Looks like it's a sand down & repaint job.

My own fault for not masking.

 

[Burnerman]

Before you get stuck in, consider using a G3 compound and one of the polishing mop kits from Toolstation or whatever.
These work well using a slow speed drill.
John

 

[norseman]

Before you get stuck in, consider using a G3 compound and one of the polishing mop kits from Toolstation or whatever.
These work well using a slow speed drill.
John

Thanks John, do you think paint stripper (ie Nitromors) would work ?

 

[jj4091]

I think you will make it worse with Nitromors

 

[Burnerman]

Stay well clear of Nitromors!
I think you'd get good advice (free) from a local bodyshop or the Chipsaway people.......they've seen all this before.
John