sabre24 no heating

Joined
4 Jan 2010
Messages
3
Reaction score
0
Location
Glasgow
Country
United Kingdom
Hi to all, I have a vokera sabre24, A few days ago there was no hot water before i changed a thermistor, then yesterday no heating, the boiler fires up as normal but a few seconds later i hear a kind of gurgling noise as if the water is draining then a hissing noise like water drying on a hot pan then it stops with the green light flashing, then ofcourse it locks for a few minutes unless i turn a hot water tap on it works as normal without heating,
Any help will be much appreciated, as with two young kids and the temperature below freezing in cumbernauld it's no fun.
 
The last one of that model I went to BG had cut a sensor wire when refitting the case!

Is the system pressure normal and is the AAV open?

Might be better to call a pro, these are not very good boilers for DIY repairs.

Tony
 
The last one of that model I went to BG had cut a sensor wire when refitting the case!

Is the system pressure normal and is the AAV open?

Might be better to call a pro, these are not very good boilers for DIY repairs.

Tony

Thanks Tony, The pressure is fine (1.5) and the aav open, Everything seems to be normal until it shuts off again.
 
just noticed while the gurgling noise is on, the pressure starts to go up until the boiler shuts off again.
After some checks, I've found that there was power going to the motor but it wasn't turning, Which was confirmed after I called someone in today.
Verdict: Pump knackered.
 

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Back
Top