Salus rt500 wiring

[bogbot]

Hello I have a logic plus 24 and want to wire a Salus rt500 rf reciever. The reciever has COM and NO terminals and the boiler has two terminals saying room stat/timer. How can I connect these correctly?
Thanks

 

[PrenticeBoyofDerry]

There will be instruction with the RF and the boiler, they explain the procedures to follow. They may even mention, what requirements are required to undertake this work.

https://www.gassaferegister.co.uk/media/1449/who-can-legally-work-on-a-gas-appliance-factsheet.pdf

 

[bogbot]

Thanks, in the Salus rt500 manual it shows the COM connected to L and the NO connected to SL. I'm unsure how L and SL relate to room stat and timer connections on the boiler.

 

[hertsboilers]

Thanks, in the Salus rt500 manual it shows the COM connected to L and the NO connected to SL. I'm unsure how L and SL relate to room stat and timer connections on the boiler.

In your case, it is a switch, it doesn't matter.

Com = common
NO = Normally Open

 

[PrenticeBoyofDerry]

I'm unsure how L and SL relate to room stat and timer connections on the boiler.

I should not really matter, but I tend to remove link and use perm live at right hand terminal and Switch line at the left hand one.