sanisplit combi

[spyder53]

Hi all can anyone one help on a diagnosis, i have a sanisplit combi, ie, three outlets, the pump motor is now running continuously since this morning even after reset, i have pulled apart and all seems to be ok with the impeller, would this suggest that the pump has had it.
Rich

 

[matt1e]

Hi all can anyone one help on a diagnosis, i have a sanisplit combi, ie, three outlets, the pump motor is now running continuously since this morning even after reset, i have pulled apart and all seems to be ok with the impeller, would this suggest that the pump has had it.
Rich

Hardly

 

[picasso]

pressure switch contacts have probably welded them selves shut, good luck working on your machine its gotta be one of the most unpleasant jobs going.

 

[spyder53]

ok thanks i assume that will be the dirty end then

 

[picasso]

Not sure never worked on one of these

View media item 58929
you could start with making sure the tube 7 is clear.

 

[matt1e]

Not sure never worked on one of these

View media item 58929
you could start with making sure the tube 6 is clear.

There also seems to be a manual button
Though not sure if that means manual motor start or not

 

[spyder53]

i have the drawing thanks though, how do's the plastic pipe work?