Scantronic 9600

[seggy365]

I have a scantronic 9600 alarm which i have had for a number of years. The battery is approx 5yrs old. I wish to replace the battery. Whilst i have the user manual i do not have the engineers manual. I do not have the engineers code and as i have lost contact with the installer has anyone any idea how i can go about this. Thanks Seggy365

 

[mryoung]

PM your email for engineer manual

 

[joe-90]

Just open the lid and change it. Use your user code to silence the tamper alarm.
The odds are the current battery is still OK anyway.

 

[mryoung]

cant comment on the state of the battery until its been tested which the op cant do.

odds are that the battery would fail a drop test

5 years old....change it

 

[joe-90]

odds are that the battery would fail a drop test

5 years old....change it

From what height?

 

[Europlex]

From what height?

Oh, you card you

 

[mryoung]

lol

 

[a15cro]

Sorry to bump an old thread.

I have the same problem and require the installers manual to reprogram the zones, codes ect.

Can anyone help please?

 

[Europlex]

Google is your friend.

 

[a15cro]

I've tried google and can only get the user manual. I need the engineers version.

 

[ahlone]

I am also looking for engineers manual so that I can replace the battery. Any one can help please? Or if any one can recommend some one to do the service in B25 area in Birmingham..

Thanks,

 

[Europlex]

I am also looking for engineers manual so that I can replace the battery. Any one can help please? Or if any one can recommend some one to do the service in B25 area in Birmingham..

Thanks,

See the 3rd post

 

[terrylockyer]

I am also looking for engineers manual so that I can replace the battery. Any one can help please? Or if any one can recommend some one to do the service in B25 area in Birmingham..

Thanks,

See the 3rd post

To download a service/installation manual from the Coopers Security website you need to be an installer and register on their ‘Touchpoint Partner Programme’.