I have screeded our Kitchen floor which was rather uneven after removing the old Ceramic tiles.
It's the first time I've tried this, it all seemed to go well and the majority of the floor is fine... However I can see a trowel sweep mark (about 10" long, raised by less than 1mm) in one are where I obviously didn't spread it enough and I've got a few drips in another area (where I think I've let the trowel drip onto an area I'd done 15 mins or so before and I didn't notice).
What's the best thing to do about these two areas? It seems overkill to redo the whole floo for the sake of these two small areas, so I was wondering if I would be able to just sand the affected areas?
For info I will be laying a laminate type floor over the top...
Thanks in advance
Tryster
It's the first time I've tried this, it all seemed to go well and the majority of the floor is fine... However I can see a trowel sweep mark (about 10" long, raised by less than 1mm) in one are where I obviously didn't spread it enough and I've got a few drips in another area (where I think I've let the trowel drip onto an area I'd done 15 mins or so before and I didn't notice).
What's the best thing to do about these two areas? It seems overkill to redo the whole floo for the sake of these two small areas, so I was wondering if I would be able to just sand the affected areas?
For info I will be laying a laminate type floor over the top...
Thanks in advance
Tryster
