Screenwash problem

Joined
20 Mar 2018
Messages
4,323
Reaction score
881
Location
Stoke-on-Trent
Country
United Kingdom
I have a Hyundai i30, 2017, 1.4 litre petrol.
Windscreen washers stopped working, motor runs so pretty sure it's a blockage. Put a hose in the reservoir and plenty of muck washed out, but it didn't cure it.
It's probably a blockage in the pump or filter, but the tank has to come out to remove the pump from it.
Tried to remove the tank, removed wheel and wheel arch liner. Removed 2 M6 bolts but can't get the tank out. It appears to pivot about something that I can't see.
Sometimes these things have a lug on the far side with a rubber grommet to go over a peg, but if so I don't know whether to pull it straight out, or up, or what. I've hoisted and levered it as much as I dare without breaking something but no joy.

I have a workshop manual which I downloaded a while back, but the pictures don't look like mine. For what it's worth, it's attached. It shows 2 bolts spaced horizontally, but on the car they’re vertical. I've been trying to find the correct manual online but no success.

I'll have another go at it tomorrow and take some pics.

If anybody has the right manual, or any suggestions that would be great!
 

Attachments

Plenty of others to choose from…

IMG_9437.jpeg
 
Can you take the hoses off the back of the jets , and see if water comes out from there when you run it?
Not really. I can prise the jet holder out, it's a rectangular plastic thing, but there's only enough hose to lift it about 40mm. The area underneath the jets is very inaccessible, and if I pulled the hose off the jet and the hose fell through the hole I'd be in a pickle.
 
I cured mine completely doing the following:
Empty tank completely, if you have a vacuum pump suck out as much as you can.
1 litre white vinegar in the tank.
A few drops on the jets and leave overnight.
Then next day try spraying in short bursts.
If even a little comes out, in the following few days keep spraying; don't do all at once otherwise you might kill the pump.
If and when all clears, finish using the vinegar and then replace with distilled water and concentrate liquid screen wash.
Do not use tablets or tap water.
 
I cured mine completely doing the following:
Empty tank completely, if you have a vacuum pump suck out as much as you can.
1 litre white vinegar in the tank.
A few drops on the jets and leave overnight.
Then next day try spraying in short bursts.
If even a little comes out, in the following few days keep spraying; don't do all at once otherwise you might kill the pump.
If and when all clears, finish using the vinegar and then replace with distilled water and concentrate liquid screen wash.
Do not use tablets or tap water.
I siphoned the water out, pretty sure as near empty as practical. A few more bits of black came out with it!
Added the vinegar, no results so far but I'll follow your procedure. Thanks
 
Back
Top