Screwfix towel warmer

Joined
5 Jun 2007
Messages
21
Reaction score
0
Location
Lancashire
Country
United Kingdom
I fitted one of these last month and thought at the time that they where expecting a lot as the brackets are plastic! A chrome tube screws to the wall then a smaller tube is attached to the rad ( 4 in all ) which slides into the wall mounted one and is secured underneath with a self tapper. Two have slit along the top front to back...Screwfix are sending new ones but surely these will do the same ? is it usual for the brackets to be plastic ? the rad is 4ft high stainless steel with curved towel rails about 2.5ft wide.

It slotted in ok so the alignment must be right.

Pete
 
Sponsored Links
You only get what you pay for!!!!!!!!!!!!!!!!!
Whats the betting your fiting another set next month unless you dont stop hanging towels on it!!!!!!!!!!!!!!!!!!
 

DIYnot Local

Staff member

If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.

Select the supplier or trade you require, enter your location to begin your search.


Are you a trade or supplier? You can create your listing free at DIYnot Local

 
Sponsored Links
Back
Top