Screws or Nails?
- Thread starter Rachh863
- Start date
Sponsored Links
9mm WBP ply is no way near thick enough for o/boarding....
what condition is the f/boards in...are they "screwed" to joists every 200/300mm....
there is no deflection/bounce on it whats so ever......
either use a 6.5mm cement based backer board,...aquapanel/hardie/no more ply etc ..follow mfr inst re:fixing o/boarding...i.e..glueing/screwing..
or 15mm WBP ply screwed every 200/300mm into joists,but prime the underside and edges with sbr/acrylic primer proir to fixing down...
have a wee scoop about prevouis threads on here..
what condition is the f/boards in...are they "screwed" to joists every 200/300mm....
there is no deflection/bounce on it whats so ever......
either use a 6.5mm cement based backer board,...aquapanel/hardie/no more ply etc ..follow mfr inst re:fixing o/boarding...i.e..glueing/screwing..
or 15mm WBP ply screwed every 200/300mm into joists,but prime the underside and edges with sbr/acrylic primer proir to fixing down...
have a wee scoop about prevouis threads on here..
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
Sponsored Links
