-
Looking for a smarter way to manage your heating this winter? We’ve been testing the new Aqara Radiator Thermostat W600 to see how quiet, accurate and easy it is to use around the home. Click here read our review.
Selfmon and Home Assistant.
- Thread starter whyme!
- Start date
Not familiar with selfmon, but from reading their docs I'd suggest you need to add the panels as MQTT Alarm Control panel and the detectors as room presence. Obviously if you don't want the panel, you don't need that.
Doesn't look like the IO module uses an MQTT schema home assistant can autodiscover, but check you've not got a notification prompting you to set it up as that will save you a load of aggravation.
Have you got an MQTT broker running? (e.g. Mosquito as an add-on if you're running HassIO, slightly more fiddly if you've got a different setup)
Just checked my instance and you'll need to configure these in the configuration yaml which can be a.. headache. Happy to try and help if you get stuck with this.
Doesn't look like the IO module uses an MQTT schema home assistant can autodiscover, but check you've not got a notification prompting you to set it up as that will save you a load of aggravation.
Have you got an MQTT broker running? (e.g. Mosquito as an add-on if you're running HassIO, slightly more fiddly if you've got a different setup)
Just checked my instance and you'll need to configure these in the configuration yaml which can be a.. headache. Happy to try and help if you get stuck with this.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local