- Joined
- 18 Apr 2022
- Messages
- 4,427
- Reaction score
- 525
- Country
I need a few.
The usual-suspect websites are awash with hundreds of different makes, all the same. The problem is if you're churning them out by the gazillion at low margins, I can see the temptation to switch from using the finest chinesium to B-grade, or to skimp on the plating, or to shorten the bit which goes into the hole in the side of the cupboard.
Can anybody recommend any good makes or suppliers?
Would prefer brass, and as I only need 8, I'd prefer not to have to buy 100.
The usual-suspect websites are awash with hundreds of different makes, all the same. The problem is if you're churning them out by the gazillion at low margins, I can see the temptation to switch from using the finest chinesium to B-grade, or to skimp on the plating, or to shorten the bit which goes into the hole in the side of the cupboard.
Can anybody recommend any good makes or suppliers?
Would prefer brass, and as I only need 8, I'd prefer not to have to buy 100.
