Hi, hope someone can help with a leaking shower pump (cold) flexi connector? I have been able to isolate the power and shut off the hot water supply but the cold supply is T'd into the cold feed without any isolation valve. I'm assuming I will need to shut off the rising main and empty the cold water storage tank before I can replace the flexi connector, unless anyone knows a different method? Seems pretty stupid to got to the expense of installing a pump and not bothering to isolate it, but there we go.
shower pump connectors
- Thread starter bordofit
- Start date
Sponsored Links
bung the pipe in the bottom of the tank.
then fit an isolation valve on the cold near the pump.
and you can fit one near the tank if you have to shut it to work on any taps etc.
then fit an isolation valve on the cold near the pump.
and you can fit one near the tank if you have to shut it to work on any taps etc.
a carrot, cork etc.
or buy a pair bungs from bq
or buy a pair bungs from bq
Sponsored Links
but I'm off to B & Q....... Many thanks for your help.DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local
