I have pumped shower system serving two rooms. It's been OK for at least 20 years, and the pressure is still good but it occasionally fails to pump when the mixer tap is turned on. After a delay it gets started but then sometlmes it's slow to turn off. The pump is an unknown brand - probably from B&Q and it has what looks like two flow switches on the cold and hot pipes. These are marked Hamlin 59600-444. The whole lot has been plumbed in making it difficult to get at without removing the hot water cylinder. Can anybody advise what I am facing getting this fixed?
Shower pump erratic
- Thread starter andyv1
- Start date
At that age you may well be looking at replacement especially if it needs a lot of work just too get at it.
Our go to shower pump is stewart turner monsoon won't fit anything else.
Our go to shower pump is stewart turner monsoon won't fit anything else.
DIYnot Local
Staff member
If you need to find a tradesperson to get your job done, please try our local search below, or if you are doing it yourself you can find suppliers local to you.
Select the supplier or trade you require, enter your location to begin your search.
Are you a trade or supplier? You can create your listing free at DIYnot Local