- Joined
- 23 Jun 2006
- Messages
- 14
- Reaction score
- 0
- Country
I have an existing gravity fed shower in the en-suite and i'm fitting another shower in the main bathroom above the bath.
I was hoping to use existing shower hot and cold feeds in the loft, and feed them into a pump. From the pump i would T-off to each shower.
Is this possible????
I think pumps are recomended to be next to the H/W cylinder, but is it ok to fit one in the loft. It would make the pipework easyer and leave me with better access for the cylinder/heating pump etc.
In the loft the tanks are raised 12" above the joists on a platform.
Finally, what pump should i go for, 2.0 bar?? Any recomendations???
Thanks for any advive
I was hoping to use existing shower hot and cold feeds in the loft, and feed them into a pump. From the pump i would T-off to each shower.
Is this possible????
I think pumps are recomended to be next to the H/W cylinder, but is it ok to fit one in the loft. It would make the pipework easyer and leave me with better access for the cylinder/heating pump etc.
In the loft the tanks are raised 12" above the joists on a platform.
Finally, what pump should i go for, 2.0 bar?? Any recomendations???
Thanks for any advive