shower pump under the bath

[cj123]

the only place i can put my shower pump is under the bath due to space any tips on installing? I gather i have to use a surrey flange for the hot and a new supply from the tank for the cold, but going under the fllorboards up to under the bath then down agin under the floorboards to the shower will that cause problems? thanks for your time

 

[seco services]

providing you can bleed the pipework of air when connected to the pump.

 

[cj123]

how would you do that?

 

[seco services]

fit air bleed valves into the pipework

 

[cj123]

before or after the shower pump?

 

[cj123]

sorry but what d you exactly mean by air bleed valves?

 

[seco services]

http://www.screwfix.com/app/sfd/cat...HZPCFEY?productId=19155&imageNo=null&ts=82342

how you want to install your pipework under floor and back up to pump and down again will cause air to get trapped, air will not go down hill.
so fit air bleed valves to bleed the pipework

 

[cj123]

thanks for your help, so to clear it up for me do i fit them after the hot nand cold have left the pump on the way to the shower or before on the feed to the pump? thanks again

 

[doitall]

thanks for your help, so to clear it up for me do i fit them after the hot nand cold have left the pump on the way to the shower or before on the feed to the pump? thanks again

All four