Hi,
I've been slowly re-doing our bathroom and have got to the stage where I'm considering shower screens. The shower array is boxed in (by the previous owner) with 9mm ply which is screwed to wooden battens which are screwed into the brick. The ply has then got tile over the top. Obviously screen doors are pretty heavy so I was wondering if using hollow wall anchors to spread the load would be enough to hold the weight.
Sorry if I've mis-posted to the wrong forum and thanks in advance.
I've been slowly re-doing our bathroom and have got to the stage where I'm considering shower screens. The shower array is boxed in (by the previous owner) with 9mm ply which is screwed to wooden battens which are screwed into the brick. The ply has then got tile over the top. Obviously screen doors are pretty heavy so I was wondering if using hollow wall anchors to spread the load would be enough to hold the weight.
Sorry if I've mis-posted to the wrong forum and thanks in advance.