I've replaced my shower tray in my ensuite and although i used the same size tray, the waste pipe doesn't marry up to the new trap.
The original waste pipe is 42mm pipe with glued joints and as such, I cannot move it over to point at the new trap.
I ordered a flexible waste pipe to solve my problem but it's 40mm OD and is therefore a) too small to fit properly in the new trap (cannot tighten compression fitting onto it) and b) too small to use in a 42mm --> 42mm coupler.
can anyone offer me any advice on how to get my waste connected up again? A 42mm flexible would be IDEAL!
Thanks
The original waste pipe is 42mm pipe with glued joints and as such, I cannot move it over to point at the new trap.
I ordered a flexible waste pipe to solve my problem but it's 40mm OD and is therefore a) too small to fit properly in the new trap (cannot tighten compression fitting onto it) and b) too small to use in a 42mm --> 42mm coupler.
can anyone offer me any advice on how to get my waste connected up again? A 42mm flexible would be IDEAL!
Thanks