Siemens thermostat

[lc04]

Wireless digital type model number I think is rdh10rf has gone off, no apparant reason,battery changed and still nowt any ideas ?

 

[gas4you]

Check power to receiver unit.

If ok, look in MI's on how to re-lock the stat to the base unit.

 

[dd1975]

you could try to go through the re-set guide in the manual ,


i'm sure i had that before with another brand

 

[lc04]

Check power to receiver unit.

If ok, look in MI's on how to re-lock the stat to the base unit.

I would if I knew what that meant, thanks for the speedy response so far fella.

 

[lc04]

Check power to receiver unit.

If ok, look in MI's on how to re-lock the stat to the base unit.

I would if I knew what that meant, thanks for the speedy response so far fella.

No power at the receiver unit.

 

[gas4you]

When the power goes off for either unit, the base and sender units have to 'learn' each other's operating frequency's again and lock onto the same signal.

It should all be clear in the MI's.

Edit; Then you have to find the problem why the base unit has not got power first.

 

[lc04]

When the power goes off for either unit, the base and sender units have to 'learn' each other's operating frequency's again and lock onto the same signal.

It should all be clear in the MI's.

Edit; Then you have to find the problem why the base unit has not got power first.

Cheers so far, MI's missing as feared does that mean I am royally ferked?

 

[gas4you]

Try the siemens web site for MI's.

 

[lc04]

Try the siemens web site for MI's.

The only version of MI's that will not open to be able to download, is.....English....